Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the battery of the Citroen C3

Model: Citroen C3 SY, SX - Years 2016-2023
Part: Battery

Today's main steps will show us how to disassemble and replace the battery of the Citroen C3, following the instructions below. First, we open the car's hood and start disconnecting both battery terminals (positive and negative); then we unscrew the battery bracket screw located at the bottom of it, as shown in the video. At this point, we replace the battery with the new one, of the right type and with the same amperage; we secure it to the base and make the electrical connection, finally starting the engine!

Posted on 10 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the steering wheel of the Citroen C3
How to remove the steering wheel of the Citroen C3
Citroen C3 (2009-2016 / SC) Removing the steering wheel of the Citroen C3 is a very simple operation for which it is necessary to first disconnect the vehicle's battery and then…
How to remove the door panel of a Citroen C3
How to remove the door panel of a Citroen C3
Citroen C3 (2016-2023 / SY, SX) In this video we can see how to remove the inner panel from the door of a Citroen C3: we start by removing the two screws located on the sides of the…
How to remove the music system panel of the Citroen C3
How to remove the music system panel of the Citroen C3
Citroen C3 (2009-2016 / SC) In this video, we will see how to remove the panel that may contain the music system of the Citroen C3: we start by using a spatula to remove the das…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos