Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the wheel bearing of a Citroen C3 MK1

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Bearing

See other generations:
Video tutorial

In this video we see the replacement of the wheel bearing of a Citroen C1 that has over 680,000 kilometers on the odometer. We lift the car and remove the wheel, then the caliper and the disc; we lubricate the supports so that we can remove them more easily and then extract the part, which we will put on the workbench.

We remove the gasket, clean the disc, extract the bearing and then put it back in place. Of course, to do this job, specific equipment is needed, as also shown in the video.

We put back the boot and the bearing, then the disc and the caliper, and then we can also put back the wheel in place.


Posted on 10 February 2025 by ScegliAuto


Related tutorials

Replacing the Battery on a Citroen C3
Replacing the Battery on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) This video explains how to replace the battery on a Citroen C3: open the car door and pull up the engine bay release lever located at the bottom left…
How to reset the tyre warning light on a Citroen C3
How to reset the tyre warning light on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) Before starting, sit in the driver's seat of your Citroen C3. Now turn the key in the ignition to activate the instrument panel and the onboard compu…
Replacement of the hood cable of a Citroen C3 MK1
Replacement of the hood cable of a Citroen C3 MK1
Citroen C3 (2002-2009 / FC, FN) In this video we can see how it is possible to replace the hood cable of a Citroen C3 MK1 with that of a bicycle. It is an emergency replacement, als…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos