Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear wheel bearing of the Citroen C5

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Bearing

Today's step-by-step instructions will show us how to disassemble and replace the rear wheel bearing of the Citroen C5. First, loosen the wheel bolts before lifting the car on the side of interest; then remove the wheel and proceed with disassembling the braking system, including the brake disc, by unscrewing and removing all the bolts, as shown in the video. At this point, it will be possible to unscrew the wheel bearing bolts, remove it, and replace it with a new one; reassemble the original bearing and check the condition of the braking system before reassembling everything!

Posted on 28 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the rear headlight of the Citroen C5
Disassembly of the rear headlight of the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) In this short guide, we will see the instructions that will allow us to disassemble and replace the rear light and its bulbs of the Citroen C5. First…
Replacement of the rear taillight bulbs of the Citroen C5
Replacement of the rear taillight bulbs of the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) In this guide we will see the instructions that will allow us to disassemble and replace the position bulbs of the rear headlight of the Citroen C5. …
How to Remove the Rear Light of the Citroen C5
How to Remove the Rear Light of the Citroen C5
Citroen C5 (2000-2008 / DC, MK 1) Here are the instructions on how to remove and replace the rear light and its bulbs of the Citroen C5, following these simple and quick steps. First,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos