Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Wheel Bearing from a Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Bearing

In this video tutorial, you will see how to remove the rear wheel bearing from a Citroen C1. First, unscrew the wheel nuts and then lift the vehicle with a jack to remove the wheel. Next, unscrew the drum screws using a T30 Torx spanner and pull it off. Now, unscrew the rear screws of the brake backing plate to remove it. To remove the bearing, you will need a special puller; once the hub is removed, fit the new one; follow the video until the end!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove a Wheel on Citroen C1
How to Remove a Wheel on Citroen C1
Citroen C1 (2005-2014 / MK 1) Learn how to remove the wheel on a Citroen C1. First, gather all the wheel removal tools from the boot. Position the jack under the jacking point of …
Replacing the Wheel with the Spare on the Citroen C1 - Peugeot 107
Replacing the Wheel with the Spare on the Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) This guide provides instructions for removing and replacing the wheel with the spare on the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. F…
How to Replace the Rear Bumper on a Citroen C1
How to Replace the Rear Bumper on a Citroen C1
Citroen C1 (2005-2014 / MK 1) Before you can start, open the tailgate of your Citroen C1. Begin by unscrewing and removing the fixing screws of the bumper located around the perim…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos