Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wheel with the Spare on the Citroen C1 - Peugeot 107

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Wheel

See other generations:
Video tutorial

This guide provides instructions for removing and replacing the wheel with the spare on the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, open the boot lid and lift the parcel shelf to access the spare wheel and the necessary replacement kit; then, use the appropriate wrench to unscrew the wheel bolts, raising the vehicle with the jack to remove it, as shown in the video.

Next, install the spare wheel, tightening the bolts in a criss-cross pattern; place the old wheel in the boot!


Updated on 19 August 2026 by ScegliAuto


Related tutorials

Replacing the Brake Fluid on the Citroen C1 - Peugeot 107
Replacing the Brake Fluid on the Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) .. the brake fluid on the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, lift the vehicle and remove the front wheel; then connect a hose.. …
Replacing the Clutch on the Citroen C1 - Peugeot 107
Replacing the Clutch on the Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) .. the clutch kit on the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, lift the vehicle and start by unscrewing the oil drain bolt, allowing.. …
How to Remove the Starter Motor from the Citroen C1 - Peugeot 107
How to Remove the Starter Motor from the Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) ..tarter motor of the Citroen C1, as well as the Peugeot 107. First, open the bonnet of your car and disconnect and remove the battery; locate the starter m.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos