Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C1
    4. : Wheel

Citroen C1 - Wheel

Citroen C1 (2005-2014 / MK 1)
Replacement of the wheel with the spare one on the Citroen C1 - Peugeot 107.
In this guide, we will see the instructions that will allow us to disassemble and replace the spare wheel on the Citroen C1, as well as on the Peugeot 107 and …read all…
Posted on 23 September 2023 by ScegliAuto
Citroen C1 (2005-2014 / MK 1)
How to remove wheel on Citroen C1
Let's see how the wheel is removed on a Citroen C1. To begin with we need to take all the wheel disassembly parts from inside the luggage compartment. We …read all…
Posted on 19 January 2024 by ScegliAuto
Loudspeaker (2) Car stereo (10) Battery (5) Spark plugs (2) Bodywork (2) Control unit (1) Key (7) Timing belt (2) V-belt (2) -board computer (2) Checks and maintenance (19) Dashboard (2) Gearshift gaiter (1) Bearing (1) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (3) Clutch (5) Light bulb (2) Headlight bulb (11) Rear light bulb (3) Antifreeze liquid (2) Dashboard light (1) License plate light (1) Third brake light (1) Handle (3) Engine (1) Starter motor (2) Gear oil (1) Brake oil (1) Engine oil (2) Door panel (4) Windshield (1) Front bumper (2) Rear bumper (3) Tires (1) Gear Shift Knob (2) Pump (1) Fuel pump (2) Instrument cluster (6) Radiator (2) Wheel (2) Fuse box (13) Seat (1) Lock (1) Outside rearview mirror (4) Interior rearview mirror (1) Windscreen wipers (7) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos