Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C1
    4. : Parking brake

Citroen C1 - Parking brake

Parking Brake Citroen C1 (2005-2014 / mk 1)

Citroen C1 (2005-2014 / MK 1)
How to Adjust the Handbrake on the Citroen C1
This video shows how to adjust the handbrake on the Citroen C1 (also applicable to the Peugeot 107 and Toyota Aygo, as they are essentially the same car). The …Read all…
Posted on 4 February 2026 by ScegliAuto
Speaker (3) Shocks (2) Antenna (1) Car stereo (13) Battery (7) Transmission (1) Spark plugs (2) Body (6) Control unit (1) Key (13) Timing belt (2) V-belt (2) Onboard computer (3) Checks and maintenance (6) Dashboard (2) Shifter boot (1) Bearing (1) Brake rotors (1) Headlight (4) Tail light (3) Air filter (7) Cabin air filter (9) Diesel fuel filter (2) Parking brake (1) Clutch (12) Light bulb (4) Headlight bulb (21) Tail light bulb (5) Interior dome light bulb (2) Antifreeze coolant (2) Instrument panel light (1) License plate light (2) (3) Handle (3) Exhaust muffler (2) Engine (1) Starter motor (3) Transmission fluid (2) Brake fluid (1) Engine oil (3) Clock (11) Door trim panel (4) Windshield (1) Front bumper (3) Rear bumper (3) Brake pads (1) Shift knob (4) Pump (1) Fuel pump (4) Instrument cluster (1) Radiator (2) Wheel (2) Fuse box (27) Seat (2) Door lock (1) Side mirror (5) Rearview mirror (1) Warning light – error code (2) (12) Tire pressure warning light (6) Service warning light (10) Fuel cap (1) Windshield wipers (15) Blower motor (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos