Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C1
    4. : Brake rotors

Citroen C1 - Brake rotors

Brake Rotors Citroen C1 (2005-2014 / mk 1)

Citroen C1 (2005-2014 / MK 1)
How to replace the front brake discs of the Citroen C1
The following steps will show us how to disassemble and replace the front brake discs of the Citroen C1. First, lift the vehicle and start removing the front …Read all…
Posted on 23 October 2025 by ScegliAuto
Speaker (3) Shocks (2) Antenna (1) Car stereo (13) Battery (7) Transmission (1) Spark plugs (2) Body (6) Control unit (1) Key (13) Timing belt (2) V-belt (2) Onboard computer (3) Checks and maintenance (6) Dashboard (2) Shifter boot (1) Bearing (1) Brake rotors (1) Headlight (4) Tail light (3) Air filter (7) Cabin air filter (9) Diesel fuel filter (2) Parking brake (1) Clutch (12) Light bulb (4) Headlight bulb (21) Tail light bulb (5) Interior dome light bulb (2) Antifreeze coolant (2) Instrument panel light (1) License plate light (2) (3) Handle (3) Exhaust muffler (2) Engine (1) Starter motor (3) Transmission fluid (2) Brake fluid (1) Engine oil (3) Clock (11) Door trim panel (4) Windshield (1) Front bumper (3) Rear bumper (3) Brake pads (1) Shift knob (4) Pump (1) Fuel pump (4) Instrument cluster (1) Radiator (2) Wheel (2) Fuse box (27) Seat (2) Door lock (1) Side mirror (5) Rearview mirror (1) Warning light – error code (2) (12) Tire pressure warning light (6) Service warning light (10) Fuel cap (1) Windshield wipers (15) Blower motor (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos