Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C1
    4. : Tail light

Citroen C1 - Tail light

Citroen C1 (2005-2014 / MK 1)
How to remove the rear light of the Citroen C1?
Removing the rear light of the Citroen C1, in order to replace the bulbs or the light itself, is very simple, let's see how to proceed in this tutorial. First …read all…
Posted on 15 July 2022 by ScegliAuto
Loudspeaker (2) Car stereo (10) Battery (5) Spark plugs (2) Bodywork (2) Control unit (1) Key (7) Timing belt (2) V-belt (2) -board computer (2) Checks and maintenance (19) Dashboard (2) Gearshift gaiter (1) Bearing (1) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (3) Clutch (5) Light bulb (2) Headlight bulb (11) Rear light bulb (3) Antifreeze liquid (2) Dashboard light (1) License plate light (1) Third brake light (1) Handle (3) Engine (1) Starter motor (2) Gear oil (1) Brake oil (1) Engine oil (2) Door panel (4) Windshield (1) Front bumper (2) Rear bumper (3) Tires (1) Gear Shift Knob (2) Pump (1) Fuel pump (2) Instrument cluster (6) Radiator (2) Wheel (2) Fuse box (13) Seat (1) Lock (1) Outside rearview mirror (4) Interior rearview mirror (1) Windscreen wipers (7) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos