Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C1
  6. : Cabin air filter

Citroen C1 - Cabin air filter

Citroen C1 (2005-2014 / MK 1)
How do you replace the cabin filter of the Citroën C1?

To replace the cabin filter in the Citroën C1, you need to remove the plastic panel on the dashboard located just below the glove compartment on the passenger …read all…
Posted on 13 April 2023 by ScegliAuto
Citroen C1 (2014-2022 / MK 2)
Replacement of the cabin air filter in the Citroen C1, Peugeot 108 and Toyota Aygo.

Before starting the operation of replacing the pollen-resistant cabin air filter in the Citroen C1 (but the operation is similar, too, for the Peugeot 108 and …read all…
Posted on 15 December 2023 by ScegliAuto
Citroen C1 (2005-2014 / MK 1)
Cabin air filter replacement

The cabin air filter is located on the passenger side, immediately above the heel strike section, that is, under the dashboard portion that acts as a glove …read all…
Posted on 27 August 2023 by ScegliAuto

Loudspeaker (2) Car stereo (10) Battery (5) Spark plugs (2) Bodywork (2) Control unit (1) Key (7) Timing belt (2) V-belt (2) -board computer (2) Checks and maintenance (19) Dashboard (2) Gearshift gaiter (1) Bearing (1) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (3) Clutch (5) Light bulb (2) Headlight bulb (11) Rear light bulb (3) Antifreeze liquid (2) Dashboard light (1) License plate light (1) Third brake light (1) Handle (3) Engine (1) Starter motor (2) Gear oil (1) Brake oil (1) Engine oil (2) Door panel (4) Windshield (1) Front bumper (2) Rear bumper (3) Tires (1) Gear Shift Knob (2) Pump (1) Fuel pump (2) Instrument cluster (6) Radiator (2) Wheel (2) Fuse box (13) Seat (1) Lock (1) Outside rearview mirror (4) Interior rearview mirror (1) Windscreen wipers (7) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos