Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter in Citroen C1, Peugeot 108 and Toyota Aygo

Model: Citroen C1 MK 2 - Years 2014-2022
Part: Cabin air filter

Before starting the operation to replace the pollen filter in the Citroen C1 (the operation is similar for the Peugeot 108 and Toyota Aygo), position the car on a ramp or flat surface to work safely. Now, locate the position of the filter inside the cabin, which is situated beneath the glove compartment on the passenger side. To access the filter housing, remove the cover by pressing the two buttons on the sides and pulling. This allows you to replace the old filter, which can be either a pollen filter or an activated carbon filter, with the new one. Pay attention to the direction in which it should be inserted into its housing.

Updated on 21 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of the starter motor of the Citroen C1 - Peugeot 108
Replacement of the starter motor of the Citroen C1 - Peugeot 108
Citroen C1 (2014-2022 / MK 2) Today we will discover the instructions that will allow us to disassemble and replace the starter motor of the Citroen C1, as well as the Peugeot 108…
Replacement of the clutch discs of the Citroen C1.
Replacement of the clutch discs of the Citroen C1.
Citroen C1 (2014-2022 / MK 2) In this guide we will see the instructions that will allow us to disassemble and replace the clutch on the Citroen C1, as well as on the Peugeot 108 …
Removing Speakers from the Citroen C1 - Peugeot 107 - Toyota Aygo
Removing Speakers from the Citroen C1 - Peugeot 107 - Toyota Aygo
Citroen C1 (2005-2014 / MK 1) This guide will show you the main steps to remove and replace the speakers in the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, get …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos