Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor of the Citroen C1 - Peugeot 108

Model: Citroen C1 MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Starter motor

See other generations:
Video tutorial

Today, let's go through the instructions to remove and replace the starter motor of the Citroen C1, as well as the Peugeot 108 and Toyota Aygo. First, open the bonnet of the vehicle and disconnect the battery; then raise the vehicle to locate the starter motor, unscrewing the fixing bolts and disconnecting the wiring to remove it, as shown in the video.

At this point, carry out the repair or replacement of the starter motor with the new one, reassembling everything and checking that the engine starts correctly.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor from the Citroen C1 - Peugeot 107
How to Remove the Starter Motor from the Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) Let’s look at the procedure necessary to remove and replace the starter motor of the Citroen C1, as well as the Peugeot 107. First, open the bonnet o…
Where is the Starter Motor Located on a Citroen C1?
Where is the Starter Motor Located on a Citroen C1?
Citroen C1 (2005-2014 / MK 1) In this video, see where the starter motor is located on a Citroen C1 and how to proceed if you need to replace it, a very simple and quick operation…
Replacing the Cabin Air Filter in Citroen C1, Peugeot 108 and Toyota Aygo
Citroen C1 (2014-2022 / MK 2) .. the Citroen C1 (the operation is similar for the Peugeot 108 and Toyota Aygo), position the car on a ramp or flat surface to work safely. Now, locate.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos