Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor from the Citroen C1 - Peugeot 107

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Starter motor

See other generations:
Video tutorial

Let’s look at the procedure necessary to remove and replace the starter motor of the Citroen C1, as well as the Peugeot 107. First, open the bonnet of your car and disconnect and remove the battery; locate the starter motor at the bottom behind the engine oil dipstick, as shown in the video.

Next, disconnect the electrical wiring by unscrewing the fixing screws to remove it; then install the new original starter motor, following the video tutorial to the end for reassembly!


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Fan on Citroen C1 - Peugeot 107
How to Remove the Cabin Fan on Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) .. the cabin fan on a Citroen C1, as well as on a Peugeot 107 and a Toyota Aygo. First, get inside the vehicle and remove the dashboard, as the fan is.. …
Replacing the Brake Fluid on the Citroen C1 - Peugeot 107
Replacing the Brake Fluid on the Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) .. the brake fluid on the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, lift the vehicle and remove the front wheel; then connect a hose.. …
Fitting Fuel Pump and Float on Citroen C1 - Peugeot 107
Fitting Fuel Pump and Float on Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) .. to fit the fuel float pump on a Citroen C1 and a Peugeot 107, as they are the same models. The fuel pump is located under the rear seat; once removed,.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos