Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change oil and filter on a Citroen C1

Model: Citroen C1 MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Engine oil

See other generations:
Video tutorial

In this video, we will see how to change the engine oil and filter of the Citroen C1: we start by unscrewing the oil cap, lift the car and support it on jack stands, unscrew the drain plug after placing a large basin to collect the old oil (which will be disposed of correctly at an authorized center).

The filter is located at the top, on one side of the engine; unscrew it with a 67 mm socket, being careful as it still contains oil. Lubricate the rubber gasket of the new filter with clean oil, screw it on by hand and then tighten it to 23 Nm. Now go underneath and put on a new plug and gasket: tighten the plug to 27 Nm. Lower the car and pour the new oil into the filler neck: the capacity is 3.6 liters.

Check the level with the dipstick as you pour the oil. Start the engine and let it run for a few minutes, until the oil pressure light goes off, then recheck the level and top up if necessary.


Posted on 27 August 2025 by ScegliAuto


Related tutorials

How to change the engine oil of the Citroen C1
How to change the engine oil of the Citroen C1
Citroen C1 (2005-2014 / MK 1) On the Citroën C1 1.0, the oil change with filter replacement is performed with the engine cold and the vehicle secured. The car is lifted at the app…
How to Change the Engine Oil and Filter on a Citroen C1
How to Change the Engine Oil and Filter on a Citroen C1
Citroen C1 (2005-2014 / MK 1) If you need to carry out a service, particularly the engine oil and filter replacement on your vehicle, you can find general guidance in this descrip…
How to change the air filter on a Citroen C1
How to change the air filter on a Citroen C1
Citroen C1 (2005-2014 / MK 1) To replace the air filter on a Citroen C1, open the bonnet and locate the filter box. Using a pair of snap ring pliers (also known as "Click-R"), rel…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos