|
Do it yourself
| |||
| ||||
How to change the engine oil of the Citroen C1
Model: Citroen C1
MK 1
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
On the Citroën C1 1.0, the oil change with filter replacement is performed with the engine cold and the vehicle secured. The car is lifted at the appropriate points, and any lower shield is removed. A collection container is placed under the oil pan, the drain plug is unscrewed, and the oil is allowed to drain out. The oil filter is removed as shown, cleaning the seating area and checking the O-ring of the new element; before reassembly, the gasket is lubricated with a drop of new oil. The oil pan plug is tightened with the specified washer, and the correct amount of oil is filled through the filler neck. The engine is started for a few seconds to fill the filter, then the oil level is checked and topped up if necessary. Finally, any leaks are checked for, the removed covers are reinstalled, and if required, the service warning is reset following the shown sequence.
Posted on 9 December 2025 by ScegliAuto
Related tutorials
Citroen C1
(2014-2022 /
MK 2)
Here are the instructions for resetting the service light for the engine oil change on a Citroen C1. First, get inside the vehicle and press and hold…
Citroen C1
(2005-2014 /
MK 1)
This guide provides the main instructions on how to dismantle and replace the clutch kit on the Citroen C1. First, open the engine bonnet of the vehi…
Citroen C1
(2014-2022 /
MK 2)
Let’s explore the instructions that will show you how to remove and replace the cabin fan on the Citroen C1. To access the cabin fan, you need to rem…
Other guides you may be interested in
|
How to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
