Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C1
    4. : Installation of the seat cover of the Citroen C1

Citroen C1 - Video tutorial

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Seat
Operation: Installation of the seat cover of the Citroen C1

Do we want to fit the seat covers to our car? Let's see how the front seat covers of the c1 are mounted. We move the seat forward and bring the seat up, then, we remove the headrest from inside the backrest. We insert the seat cover from the top to the bottom of the backrest, where necessary we must remove the controls on the side of the seat by pulling them towards us. After inserting the upper seat cover, pass it with your hands around the headrest seals. We mount the lower seat cover of the seat. We fix the various hooks under the car seat until completely locked.


Posted on 20 January 2024 by ScegliAuto

    Frequently Asked Questions

    • C1 2014-2022 - How to remove the seat cover in the Citroen C1? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos