Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Fuel Pump and Float on Citroen C1 - Peugeot 107

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Fuel pump

In this video tutorial, you will see how to fit the fuel float pump on a Citroen C1 and a Peugeot 107, as they are the same models. The fuel pump is located under the rear seat; once removed, take off the cover to access the pump. Disconnect the electrical connector and the fuel pipe, then unscrew the retaining ring; once removed, replace the pump with the new one, inserting it and reconnecting the fuel pipes. Finally, screw the plastic ring back on and replace the upper cover, reconnecting the electrical connector, as illustrated in the video!

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump/Fuel Float on the Citroen C1
How to Replace the Fuel Pump/Fuel Float on the Citroen C1
Citroen C1 (2005-2014 / MK 1) .. on the Citroen C1 first series, as well as on the Peugeot 107 and Toyota Aygo. First, locate the fuel pump, which is found under the rear bench seat;.. …
Replacing the Fuel Pump on the Citroen C1 (also on Toyota Aygo and Peugeot 107)
Replacing the Fuel Pump on the Citroen C1 (also on Toyota Aygo and Peugeot 107)
Citroen C1 (2005-2014 / MK 1) .. The same procedure applies to the Toyota Aygo and Peugeot 107, which share the same chassis. You can find the pump for replacement on AliExpress with.. …
How to Remove the Starter Motor from the Citroen C1 - Peugeot 107
How to Remove the Starter Motor from the Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) ..tarter motor of the Citroen C1, as well as the Peugeot 107. First, open the bonnet of your car and disconnect and remove the battery; locate the starter m.. …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos