|
Do it yourself
| |||
| ||||
Replacing the Fuel Pump on the Citroen C1 (also on Toyota Aygo and Peugeot 107)
Model: Citroen C1
MK 1
- Years 2005-2014
Let's see how to change the fuel pump on a Citroen C1. The same procedure applies to the Toyota Aygo and Peugeot 107, which share the same chassis. You can find the pump for replacement on AliExpress with code 1005005871470151 at a price of £34.59, with delivery in 3 days costing £24.66. It's ideal to have the fuel tank as empty as possible. First, you need to relieve the fuel pressure, and the simplest way is to remove the fuse related to the pump itself, consulting the user manual. With the fuse removed, start the engine: it will not start because the fuel pump is missing, but let it run for 5-10 seconds to relieve the pressure. Disconnect the negative terminal of the battery and remove the rear seat; you will see a plastic panel shaped like a hatch secured with screws. Remove the panel and underneath you will find a locking ring holding the pump module. Insert the new pump, replacing the gasket; hand-tighten the locking ring, reconnect the electrical connector and fuel lines, replace the panel and rear seat, reconnect the battery, replace the fuse, insert the key and turn it without starting the engine. You will hear the pump activate to pressurise the system. Start the engine, which may take a few seconds longer than usual.
Posted on 24 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Citroen C1
(2005-2014 /
MK 1)
In this video tutorial, you will learn how to remove and replace the fuel pump or float pump on the Citroen C1 first series, as well as on the Peugeo…
Citroen C1
(2005-2014 /
MK 1)
This guide provides instructions for removing and replacing the wheel with the spare on the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. F…
Citroen C1
(2005-2014 /
MK 1)
This guide will show you the main steps to remove and replace the speakers in the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, get …
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.197
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |