Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Key Battery on the Citroen C1 - Toyota Aygo

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Key

Let's look at the steps that will allow you to disassemble and replace the battery in the remote key for the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, take your remote and use something thin, like a flat screwdriver, to pry open the remote in two parts to access the battery, as shown in the video. Now, remove and replace the battery with a new one of the correct type (CR 2032 or 2025 at 3V); insert it the right way round and reassemble the two halves of the remote!

Updated on 23 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Key Battery on Citroen C1
How to Replace the Key Battery on Citroen C1
Citroen C1 (2005-2014 / MK 1) How to disassemble the key to replace the battery? Disassemble the key of the Citroen C1 and see how to replace the dead battery. Take the remote key…
How to Program the Key for Citroen C1 - Peugeot 107 - Toyota Aygo
How to Program the Key for Citroen C1 - Peugeot 107 - Toyota Aygo
Citroen C1 (2005-2014 / MK 1) .. the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, get into the vehicle with your new key to be programmed; then insert the key and.. …
How to Replace the Remote Battery on the Citroën C1
How to Replace the Remote Battery on the Citroën C1
Citroen C1 (2005-2014 / MK 1) To replace the remote battery on the Citroën C1, you need to loosen the screw located at the back of the device, just below the keyring: once this sc…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos