Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Key for Citroen C1 - Peugeot 107 - Toyota Aygo

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

In this brief and simple guide, you will see the steps to program the remote key for the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, get into the vehicle with your new key to be programmed; then insert the key and open the driver's door, starting the ignition once and closing the door a couple of times, as shown in the video.

Perform this procedure twice and carry out the same operation for the lock, following the video tutorial to the end for correct remote programming!


Updated on 15 August 2026 by ScegliAuto


Related tutorials

Removing Speakers from the Citroen C1 - Peugeot 107 - Toyota Aygo
Removing Speakers from the Citroen C1 - Peugeot 107 - Toyota Aygo
Citroen C1 (2005-2014 / MK 1) .. the speakers in the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, get inside the vehicle and start by removing the speakers located.. …
How to Turn Off the Engine Warning Light on the Citroen C1
How to Turn Off the Engine Warning Light on the Citroen C1
Citroen C1 (2005-2014 / MK 1) .. light illuminated on the dashboard of your Toyota Aygo/Citroen C1/Peugeot 107 first generation, a common cause is the oxygen sensor on the exhaust.. …
Adjusting the Throttle Cable on the Citroen C1 - Peugeot 107
Adjusting the Throttle Cable on the Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) ..able pedal on the Citroen C1, as well as on the Peugeot 107 and Toyota Aygo. First, open the bonnet of your car and locate the throttle cable, situated o.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos