Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Adjusting the Throttle Cable on the Citroen C1 - Peugeot 107

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

See other generations:
Video tutorial

Today’s guide shows you how to adjust the throttle cable pedal on the Citroen C1, as well as on the Peugeot 107 and Toyota Aygo. First, open the bonnet of your car and locate the throttle cable, situated on the left under the air filter housing; then adjust the locknut to tighten the cable using a 10 mm spanner, as shown in the video.

At this point, carry out various tests until you achieve the desired result, following the video tutorial to the end!


Updated on 23 October 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor from the Citroen C1 - Peugeot 107
How to Remove the Starter Motor from the Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) ..tarter motor of the Citroen C1, as well as the Peugeot 107. First, open the bonnet of your car and disconnect and remove the battery; locate the starter m.. …
Removing Speakers from the Citroen C1 - Peugeot 107 - Toyota Aygo
Removing Speakers from the Citroen C1 - Peugeot 107 - Toyota Aygo
Citroen C1 (2005-2014 / MK 1) .. the speakers in the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, get inside the vehicle and start by removing the speakers located.. …
Replacing the Brake Fluid on the Citroen C1 - Peugeot 107
Replacing the Brake Fluid on the Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) .. the brake fluid on the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, lift the vehicle and remove the front wheel; then connect a hose.. …

    Frequently Asked Questions

    • C1 2005-2014 - How many liters is the fuel reserve of the Citroen C1? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos