Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C1
  6. : Disassembly of the speakers of Citroen C1 - Peugeot 107 - Toyota Aygo.

Citroen C1 - Video tutorial

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Loudspeaker
Operation: Disassembly of the speakers of Citroen C1 - Peugeot 107 - Toyota Aygo.

Today's guide will show us the main steps on how to disassemble and replace the speakers of the Citroen C1, as well as the Peugeot 107 and the Toyota Aygo. First, we get into the car and start removing the speakers that we find on the top of the dashboard, by prying on the grilles; then we unscrew the fixing screws of the speakers and disconnect the power supply electrical connector, as shown in the video. At this point, we proceed to remove the side speakers in the same way, replacing them with the new ones, following the video tutorial until the end!


Posted on 4 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos