Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Speakers on the Citroen C1

Model: Citroen C1 MK 2 - Years 2014-2022
Part: Speaker

If you want to improve the audio system performance of the Citroen C1, you can replace the two front speakers with ones that have better performance. To replace them, remove the protective grille and unscrew the two fixing screws, take out the speaker and disconnect the electrical connector. Take the new speakers; if the fixing system is of the four-slot type, use pliers to remove two. The fitting kit will include connection wires that you need to connect to the system cables by cutting the original connector and connecting them directly, ensuring correct polarity. Place the speaker in its location and secure it with the two screws, position the grille, and repeat the entire procedure for the other channel.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Speakers from the Citroen C1 - Peugeot 107 - Toyota Aygo
Removing Speakers from the Citroen C1 - Peugeot 107 - Toyota Aygo
Citroen C1 (2005-2014 / MK 1) This guide will show you the main steps to remove and replace the speakers in the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, get …
How to install or replace the rear speakers of the Citroen C1
How to install or replace the rear speakers of the Citroen C1
Citroen C1 (2005-2014 / MK 1) Today we will see the instructions that will allow us to install or replace the rear speakers of the Toyota Aygo. First of all, we get on board the c…
How to Remove the Dashboard of the Citroën C1?
How to Remove the Dashboard of the Citroën C1?
Citroen C1 (2005-2014 / MK 1) To remove the dashboard of the Citroën C1, rotate the steering wheel to access the screws securing the trim around the steering column. Next, remove …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos