Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the third brake light of a Citroen C1.

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part:

See other generations:
Video tutorial

In today's video tutorial, we can see how to replace the third brake light on a first-generation Citroen C1. However, the same procedure is also valid for the Peugeot 107 and Toyota Aygo from the same years. Let's start the replacement by taking a normal Phillips screwdriver and unscrewing the two screws on the sides of the third brake light that hold it in place.

Then, remove the third brake light from its housing and disconnect the wiring of the bulbs and the water tube for windshield wiper cleaning in order to completely remove it. Finally, all that's left is to install a new one following the reverse procedure.


Posted on 11 March 2025 by ScegliAuto


Related tutorials

How to Change Third Brake Light Bulb on Citroen C1
How to Change Third Brake Light Bulb on Citroen C1
Citroen C1 (2005-2014 / MK 1) Replace the blown bulbs in the third brake light of a Citroen C1. Unscrew the plastic cover to access the third brake light. Remove the protective pl…
How to Replace the Battery in a Citroen C3 Key
How to Replace the Battery in a Citroen C3 Key
Citroen C1 (2005-2014 / MK 1) How to replace the battery in a Citroen C3 key? Follow this guide to perform the replacement effectively. Take your ignition key and use a screwdrive…
How to Replace the Rear Bumper on a Citroen C1
How to Replace the Rear Bumper on a Citroen C1
Citroen C1 (2005-2014 / MK 1) Before you can start, open the tailgate of your Citroen C1. Begin by unscrewing and removing the fixing screws of the bumper located around the perim…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos