|
Do it yourself
| |||
| ||||
How to Replace the Windscreen of a Citroën C4 Picasso
Model: Citroen C4 Picasso
MK 2
- Years 2013-2022
To replace the windscreen of a Citroën C4 Picasso, start by working from the engine compartment. Open the bonnet and remove the plastic covers at the base of the windscreen. Unscrew the fixings of the windscreen grille and remove it. Disconnect and remove the wiper arms by unscrewing the securing nuts and pulling them off the spindles with a puller if necessary. Remove any upper seals or trims. From the inside, remove the trim of the A-pillars to free the edges of the glass. Using a cutting wire or specific tool, cut the polyurethane seal that secures the windscreen around the entire perimeter and remove the glass with suction cups. Clean the seating area thoroughly, removing any adhesive residue. Apply primer and lay a new bead of polyurethane. Position the new windscreen accurately, press it evenly, and reassemble all the removed components, respecting the adhesive's drying times.
Posted on 9 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Citroen C4 Picasso
(2013-2022 /
MK 2)
In this guide, you will find instructions on how to remove and replace the front windscreen of the Citroen C4 Picasso. First, open the bonnet and beg…
Citroen C4 Picasso
(2006-2013 /
MK 1)
In today's tutorial video, you will see the instructions that will allow you to remove and replace the windscreen washer pump of the Citroen C4 Grand…
Citroen C4 Picasso
(2006-2013 /
MK 1)
To replace the wiper blades on the Citroën C4 Grand Picasso, lift the arms to which the blades are attached so that they do not touch the windscreen.…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.167
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |