Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Windscreen on the Citroen C4 Picasso

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Windshield

In this guide, you will find instructions on how to remove and replace the front windscreen of the Citroen C4 Picasso. First, open the bonnet and begin by removing the plastic panel located under the wipers; then, unscrew the wiper bolts to remove them, as shown in the video. At this point, use a thin wire to detach the windscreen from the silicone seal; now clean the base of the glass thoroughly and apply the new sealant before installing the new windscreen!

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on a Citroën C4 Grand Picasso
How to Replace the Wiper Blades on a Citroën C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) To replace the wiper blades on the Citroën C4 Grand Picasso, lift the arms to which the blades are attached so that they do not touch the windscreen.…
How to Replace the Windscreen of a Citroën C4 Picasso
How to Replace the Windscreen of a Citroën C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) To replace the windscreen of a Citroën C4 Picasso, start by working from the engine compartment. Open the bonnet and remove the plastic covers at the…
Replacement of the front windshield wipers of the Citroen C4 Picasso
Replacement of the front windshield wipers of the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Today we will see the instructions that will allow us to disassemble and replace the front wipers of the Citroen C4 Picasso. First of all, move to th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos