Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Third Brake Light Bulb on Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part:

Replace the blown bulbs in the third brake light of a Citroen C1. Unscrew the plastic cover to access the third brake light. Remove the protective plastic, separate the bulb holder from the unit, and extract the damaged bulbs. Fit the new bulbs into the brake light. Insert the bulb holder back into the housing of the tailgate. Refit the protective plastic of the unit. Screw in the side screws of the unit. Test the correct operation of the newly fitted bulbs on the Citroen C1 (turn on the front lights using the control levers).

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the third brake light of a Citroen C1.
Replacement of the third brake light of a Citroen C1.
Citroen C1 (2005-2014 / MK 1) In today's video tutorial, we can see how to replace the third brake light on a first-generation Citroen C1. However, the same procedure is also vali…
The problem of the third brake light that allows water to leak on the Citroen C1.
The problem of the third brake light that allows water to leak on the Citroen C1.
Citroen C1 (2014-2022 / MK 2) In this video we can see what the problem is with the third brake light on Citroen C1 (but also Toyota Aygo and Peugeot 108) from which water easily …
How to Replace the Front Headlight Bulb on a Citroen C1
How to Replace the Front Headlight Bulb on a Citroen C1
Citroen C1 (2005-2014 / MK 1) Replacing the front headlight bulb on a Citroen C1 is a straightforward task. To do this, you need to: - Open the bonnet; - Disconnect the connector;…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos