Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stop Light Bulb from a Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Tail light bulb

Before you begin, open the boot of your Citroen C1. Start by unscrewing and removing the screws that secure the rear light to the car's frame. Next, extract the light unit and disconnect the electrical connector. Once you have removed the rear light, you will reach the bulb holder. Proceed by unclipping the retaining clips of the bulb holder. After completing this step, you will access the blown stop bulb, which you need to unclip and remove, concluding the disassembly.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Dipped Beam on a Citroen C1
Replacing the Dipped Beam on a Citroen C1
Citroen C1 (2014-2022 / MK 2) Open the bonnet and place the support rod. Accessing the rear of the headlamp, remove the round cover by simply pulling it off to access the bulb. Di…
How to replace the front headlight bulb of the Citroen C1
How to replace the front headlight bulb of the Citroen C1
Citroen C1 (2005-2014 / MK 1) The following video tutorial shows us how to replace the headlight bulb of the right front headlight of a Citroen C1 car, model produced from 2005 to…
Replacement of the third brake light of a Citroen C1.
Replacement of the third brake light of a Citroen C1.
Citroen C1 (2005-2014 / MK 1) In today's video tutorial, we can see how to replace the third brake light on a first-generation Citroen C1. However, the same procedure is also vali…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos