Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bumper on a Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Rear bumper

Before you can start, open the tailgate of your Citroen C1. Begin by unscrewing and removing the fixing screws of the bumper located around the perimeter. Next, unclip the lower clips by simply unclipping them. Once you have also removed the clips, pull the bumper away from its housing, then disconnect the internal connectors, completing the disassembly. To fit the new bumper, all you need to do is follow these instructions in reverse, and you will have successfully completed the replacement.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper on a Citroen C1
How to Remove the Rear Bumper on a Citroen C1
Citroen C1 (2005-2014 / MK 1) Lift the boot of the luggage compartment and secure it. Raise the car on a jack and use a plastic or metal lever to remove the securing pins located …
How to Remove the Rear Bumper from a Citroen C1
How to Remove the Rear Bumper from a Citroen C1
Citroen C1 (2005-2014 / MK 1) How do you remove a rear bumper mounted on a Citroen C1? Follow these steps; it’s not too complex if done methodically. First, use a screwdriver to u…
How to Remove the Front Bumper of a Citroën C1?
How to Remove the Front Bumper of a Citroën C1?
Citroen C1 (2005-2014 / MK 1) To remove the front bumper of a Citroën C1, open the bonnet to access the screws located at the top of the bumper. Once these screws are completely l…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos