Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Citroen C1

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Rear bumper

See other generations:
Video tutorial

How do you remove a rear bumper mounted on a Citroen C1? Follow these steps; it’s not too complex if done methodically. First, use a screwdriver to unscrew the screws in the fuel filler area, then unscrew the screws around the bumper perimeter located at the sides of the wheel arch liners, and unscrew the retaining screws at the bottom of the bumper (between the chassis and the bumper).

Once the bumper is free from any screws or pins, grasp it with your hands and pull it away from the bodywork (disconnect any power cables).


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper on a Citroen C1
How to Remove the Rear Bumper on a Citroen C1
Citroen C1 (2005-2014 / MK 1) Lift the boot of the luggage compartment and secure it. Raise the car on a jack and use a plastic or metal lever to remove the securing pins located …
How to Replace the Rear Bumper on a Citroen C1
How to Replace the Rear Bumper on a Citroen C1
Citroen C1 (2005-2014 / MK 1) Before you can start, open the tailgate of your Citroen C1. Begin by unscrewing and removing the fixing screws of the bumper located around the perim…
How to Remove the Front Bumper of a Citroën C1?
How to Remove the Front Bumper of a Citroën C1?
Citroen C1 (2005-2014 / MK 1) To remove the front bumper of a Citroën C1, open the bonnet to access the screws located at the top of the bumper. Once these screws are completely l…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos