Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard of the Citroën C1?

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Dashboard

To remove the dashboard of the Citroën C1, rotate the steering wheel to access the screws securing the trim around the steering column. Next, remove the central display and the speakers located at the top of the dashboard by unscrewing their respective fixing screws. This will allow all the trim pieces that make up the dashboard to be disengaged and extracted from the cabin. You can then replace them: finally, remount all the trim pieces, securing them with the appropriate screws and clipping them back into place.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Fan on Citroen C1 - Peugeot 107
How to Remove the Cabin Fan on Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) Follow these instructions to remove and replace the cabin fan on a Citroen C1, as well as on a Peugeot 107 and a Toyota Aygo. First, get inside the v…
Where to Find the Fuse Box of the Citroen C1
Where to Find the Fuse Box of the Citroen C1
Citroen C1 (2005-2014 / MK 1) In this mini guide dedicated to your Citroen C1 first series (2005-2014), discover how to easily and quickly locate the fuse box containing all the v…
How to Replace the Radio in a Citroën C1
How to Replace the Radio in a Citroën C1
Citroen C1 (2005-2014 / MK 1) To replace the radio in a Citroën C1, pry off the knob in the centre of the dashboard. Then, leverage the upper part of the central panel of the dash…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos