Do it yourself
| ||||
|
Citroen C1 - Video tutorial
Model: Citroen C1
MK 1
- Years 2005-2014 In this video tutorial, we will see how to disassemble and replace the external door handle of the Citroen C1, following the instructions below. First, we open the front door and start by disassembling and removing the door panel, unscrewing the fixing screws. Then, we disconnect the lock from the inside, also disconnecting the handle cable, as shown in the video. At this point, we unscrew the handle screw to remove it, replacing it with the new one. Finally, we reassemble the door panel, applying the reverse procedure!
Posted on 27 December 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.035
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |