Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Handle of the Citroen C1?

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Handle

As shown in this tutorial, removing the external handle on the Citroen C1 is a very simple task. First, you need to remove the internal panel. Start by taking off the cover next to the internal handle, then unscrew the three indicated screws with a cross-head screwdriver. Next, remove the window winding handle and unclip the entire panel starting from the bottom. Once done, detach the lock rod, unscrew the two fastening bolts of the handle using a 10mm spanner, and install the replacement by following the reverse procedure.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Door Handle on a Citroen C1
How to Replace the External Door Handle on a Citroen C1
Citroen C1 (2005-2014 / MK 1) In this tutorial, you will learn how to remove and replace the external door handle on a Citroen C1 by following the instructions below. First, open …
How to Remove the Door Panel on a Citroen C1
How to Remove the Door Panel on a Citroen C1
Citroen C1 (2014-2022 / MK 2) This video shows how to remove the door panel and handle from the door housing on a Citroen C1. Use a Torx screwdriver to unscrew the securing screw …
Fuse Layout and Positioning for the External Fuses of the Citroen C1 1.2
Fuse Layout and Positioning for the External Fuses of the Citroen C1 1.2
Citroen C1 (2014-2022 / MK 2) In just a few simple steps, we will see useful information regarding the layout of the external fuse box of the Citroen C1 1.2. First, open the bonne…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos