Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Citroen C1

Model: Citroen C1 MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Door trim panel

See other generations:
Video tutorial

This video shows how to remove the door panel and handle from the door housing on a Citroen C1. Use a Torx screwdriver to unscrew the securing screw located in the door as shown in the video, then detach the door opening handle and remove it from the door.

Now move on to removing the rear door panel: use a lever to remove the plastic cover of the handle, then use a screwdriver to unscrew the internal door handle, unscrewing the screws located there.

Once all screws are removed, use the lever to detach all the plastic clips holding the door. Pull the door panel off by hand and disconnect any power connectors.

Be careful not to lose any of the clips behind the removed plastic panel.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of a Citroen C1
How to Remove the Front Door Panel of a Citroen C1
Citroen C1 (2005-2014 / MK 1) The Citroen C1 features a unique door panel that does not cover the entire door. It consists of a lower section that houses the window switch, connec…
How to Replace the External Door Handle on a Citroen C1
How to Replace the External Door Handle on a Citroen C1
Citroen C1 (2005-2014 / MK 1) In this tutorial, you will learn how to remove and replace the external door handle on a Citroen C1 by following the instructions below. First, open …
How to Remove the Door Panel of a Citroen C1
How to Remove the Door Panel of a Citroen C1
Citroen C1 (2005-2014 / MK 1) Remove the left door panel of a Citroen C1, here’s how to proceed. Before starting the disassembly, disconnect the battery terminals located in the e…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos