Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel of a Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Door trim panel

The Citroen C1 features a unique door panel that does not cover the entire door. It consists of a lower section that houses the window switch, connecting to a semi-panel that reaches up to the door handle, which remains fixed to the door itself. To remove this panel, unclip the trim plate located just behind the handle, then unscrew the three screws underneath. At this point, lever along the edges to unclip the pressure clips and completely remove the panel, disconnecting the power connector for the window switch.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Door Handle on a Citroen C1
How to Replace the External Door Handle on a Citroen C1
Citroen C1 (2005-2014 / MK 1) In this tutorial, you will learn how to remove and replace the external door handle on a Citroen C1 by following the instructions below. First, open …
How to Remove the Door Panel on a Citroen C1
How to Remove the Door Panel on a Citroen C1
Citroen C1 (2014-2022 / MK 2) This video shows how to remove the door panel and handle from the door housing on a Citroen C1. Use a Torx screwdriver to unscrew the securing screw …
How to Replace the Door Lock on a Citroën C1?
How to Replace the Door Lock on a Citroën C1?
Citroen C1 (2005-2014 / MK 1) To replace the door lock on a Citroën C1, loosen the bolts securing the panel by removing the internal grab handle and the window switch. Once these …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos