Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C1
    4. : Handle

Citroen C1 - Handle

Citroen C1 (2005-2014 / MK 1)
How to replace the external door handle of the Citroen C1
In this video tutorial, we will see how to disassemble and replace the external door handle of the Citroen C1, following the instructions below. First, we open …read all…
Posted on 27 December 2023 by ScegliAuto
Citroen C1 (2005-2014 / MK 1)
How to disassemble the outside door handle of the Citroen C1?
As we can see in this tutorial, disassembling the outside door handle on your Citroen C1 is a very simple operation. To do this, we will first have to …read all…
Posted on 5 June 2023 by ScegliAuto
Citroen C1 (2014-2022 / MK 2)
Internal handle replacement on Citroen C1
Today we are going to see how to replace the inside handle of the Citroen C1. By internal handle we do not mean the handle with the lock, but the one used to …read all…
Posted on 7 January 2024 by ScegliAuto
Loudspeaker (2) Car stereo (10) Battery (5) Spark plugs (2) Bodywork (2) Control unit (1) Key (7) Timing belt (2) V-belt (2) -board computer (2) Checks and maintenance (19) Dashboard (2) Gearshift gaiter (1) Bearing (1) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (3) Clutch (5) Light bulb (2) Headlight bulb (11) Rear light bulb (3) Antifreeze liquid (2) Dashboard light (1) License plate light (1) Third brake light (1) Handle (3) Engine (1) Starter motor (2) Gear oil (1) Brake oil (1) Engine oil (2) Door panel (4) Windshield (1) Front bumper (2) Rear bumper (3) Tires (1) Gear Shift Knob (2) Pump (1) Fuel pump (2) Instrument cluster (6) Radiator (2) Wheel (2) Fuse box (13) Seat (1) Lock (1) Outside rearview mirror (4) Interior rearview mirror (1) Windscreen wipers (7) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos