Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C1
  6. : Windscreen wipers

Citroen C1 - Windscreen wipers

Citroen C1 (2005-2014 / MK 1)
How to disassemble the wiper motor in the Citroen C1?

In this tutorial we can see how to replace the wiper motor in your Citroen C1, a very simple operation. First of all, make sure that the key is not inserted, …read all…
Posted on 16 April 2023 by ScegliAuto
Citroen C1 (2005-2014 / MK 1)
How to replace the wiper blades on the Citroen C1

In today's video tutorial we will see how to remove and replace the wiper blades on the Citroen C1 and on most of the manufacturer's models, but also on the …read all…
Posted on 28 April 2024 by ScegliAuto
Citroen C1 (2005-2014 / MK 1)
Replacement rear wiper arm on Citroen C1

Using a 12 mm socket wrench, unscrew the nut located above the pivot pin on your rear wiper. All you have to do is do this to be able to extract the wiper, arm …read all…
Posted on 18 January 2024 by ScegliAuto
Citroen C1 (2005-2014 / MK 1)
Change wiper blades Citroen C1

In this short video tutorial we will see the instructions to be able to replace the front and rear wiper blades on a Citroen C1 first series. Let's start by …read all…
Posted on 5 January 2024 by ScegliAuto
Citroen C1 (2005-2014 / MK 1)
Citroen C1 wiper replacement

In this video guide we will see how to remove and replace the windshield wipers of a Citroen C1 first series. Let's get the original spare part and start …read all…
Posted on 29 December 2023 by ScegliAuto
Citroen C1 (2005-2014 / MK 1)
How to remove the brush on Citroen C1

Let's see how to remove and replace the brush placed on the rear window of a Citroen C1. We take the rear brush and pull (as in the video) the brush from the …read all…
Posted on 15 November 2023 by ScegliAuto
Citroen C1 (2005-2014 / MK 1)
How to replace the front wiper blade on a Citroen C1

How to replace the front wiper blade on a Citroen C1? Take the front brush (to be replaced) with your hands, pull (as in the video) the mobile brush gently …read all…
Posted on 11 November 2023 by ScegliAuto

Loudspeaker (2) Car stereo (10) Battery (5) Spark plugs (2) Bodywork (2) Control unit (1) Key (7) Timing belt (2) V-belt (2) -board computer (2) Checks and maintenance (19) Dashboard (2) Gearshift gaiter (1) Bearing (1) Headlight (3) Tail light (1) Air filter (1) Cabin air filter (3) Clutch (5) Light bulb (2) Headlight bulb (11) Rear light bulb (3) Antifreeze liquid (2) Dashboard light (1) License plate light (1) Third brake light (1) Handle (3) Engine (1) Starter motor (2) Gear oil (1) Brake oil (1) Engine oil (2) Door panel (4) Windshield (1) Front bumper (2) Rear bumper (3) Tires (1) Gear Shift Knob (2) Pump (1) Fuel pump (2) Instrument cluster (6) Radiator (2) Wheel (2) Fuse box (13) Seat (1) Lock (1) Outside rearview mirror (4) Interior rearview mirror (1) Windscreen wipers (7) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos