Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wiper Motor on the Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Windshield wipers

In this tutorial, you will learn how to replace the wiper motor on the Citroen C1, a very simple operation. First, ensure the key is not in the ignition. Then, open the bonnet, remove the caps from the wiper joints, and unscrew the corresponding bolts. Next, remove the fixing rivets from the plastic plate, separate it, and disconnect all cables attached to it. At this point, unscrew the two fixing bolts of the actuator using a 10mm spanner, remove it from the support, and disconnect the power connector.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front wiper blades on a Citroën C1 MK1
How to replace the front wiper blades on a Citroën C1 MK1
Citroen C1 (2005-2014 / MK 1) Replacing the front wiper blades on a Citroën C1 MK1 is straightforward. Lift the wiper arms away from the windscreen. Press the side clips to releas…
How to Replace the Wiper Blades on a Citroen C1
How to Replace the Wiper Blades on a Citroen C1
Citroen C1 (2005-2014 / MK 1) In today's tutorial video, you will learn how to remove and replace the wiper blades on a Citroen C1 and most models from the manufacturer, as well a…
Changing Wiper Blades on Citroen C1
Changing Wiper Blades on Citroen C1
Citroen C1 (2005-2014 / MK 1) In this short video tutorial, you will see the instructions for replacing the front and rear wiper blades on a first-generation Citroen C1. Start by …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos