Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C1
  6. : How to remove the brush on Citroen C1

Citroen C1 - Video tutorial

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Windscreen wipers
Operation: How to remove the brush on Citroen C1

Let's see how to remove and replace the brush placed on the rear window of a Citroen C1. We take the rear brush and pull (as in the video) the brush from the shaft (gently without breaking it); we remove the rubber from the brush. We mount the new rubber of the brush and the same on the mobile arm (if the rubber is original we must adjust the length by cutting it as shown in the video). Finally we lower the wiper arm to the rear window and test the new blade with the rear wiper drive. It is always preferable to mount original parts for a longer duration and superior quality.


Posted on 15 November 2023 by ScegliAuto



How to replace the front wiper blade on a Citroen C1
Citroen C1 (2005-2014 / MK 1) How to replace the front wiper blade on a Citroen C1? Take the front brush (to be replaced) with your hands, pull (as in the video) the mobile brush
Change wiper blades Citroen C1
Citroen C1 (2005-2014 / MK 1) In this short video tutorial we will see the instructions to be able to replace the front and rear wiper blades on a Citroen C1 first series. Let's s
Replacement rear wiper arm on Citroen C1
Citroen C1 (2005-2014 / MK 1) Using a 12 mm socket wrench, unscrew the nut located above the pivot pin on your rear wiper. All you have to do is do this to be able to extract the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos