Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Wiper Arm on a Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Windshield wipers

Using a 12 mm socket, unscrew the nut located above the pivot of your rear wiper. This will allow you to remove the wiper, arm, and blade as a complete unit. Replace the fixing clips on the pivot if they are damaged; otherwise, leave them in place. Clean the pivot with a wire brush and apply some grease. Fit the new arm and screw on one or two M8 nuts, depending on the length of your nuts and the wiper pivot. Tighten them properly and test the correct operation of the rear wiper.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Citroen C1
How to Replace the Rear Light Bulb on a Citroen C1
Citroen C1 (2014-2022 / MK 2) If you intend to change one of the rear light bulbs on your second-generation Citroen C1 yourself, simply follow the steps described in this guide. F…
How to Replace the Rear Number Plate Light on a Citroen C1
How to Replace the Rear Number Plate Light on a Citroen C1
Citroen C1 (2005-2014 / MK 1) Start by exiting the cabin of your Citroen C1 and heading to the rear number plate. Next, unclip the number plate light frame using a flathead screwd…
How to replace the rear headlight bulbs of the Citroen C1
How to replace the rear headlight bulbs of the Citroen C1
Citroen C1 (2005-2014 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the bulbs of the rear light of the Citroen C1. First, we open t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos