Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove and Replace the Boot Seal on the Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014

In this video tutorial, follow the procedure to remove and replace the boot seal on the first series Citroen C1, as well as the Peugeot 107 and Toyota Aygo. First, open the boot lid and start by removing the seal from the top downwards; then clean the entire side area, as shown in the video. At this point, fit and secure the new seal correctly to prevent any water ingress; follow the video to the end for reassembly!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Repair the Rear Light Seal on a Citroën C1 (Water in the Boot)
How to Repair the Rear Light Seal on a Citroën C1 (Water in the Boot)
Citroen C1 (2005-2014 / MK 1) If water enters the boot of a Citroën C1 (and its siblings Peugeot 107 and Toyota Aygo), the cause is often the rear light seal. To repair it, remove…
How to replace the rear headlight bulbs of the Citroen C1
How to replace the rear headlight bulbs of the Citroen C1
Citroen C1 (2005-2014 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the bulbs of the rear light of the Citroen C1. First, we open t…
Replacing the Wheel with the Spare on the Citroen C1 - Peugeot 107
Replacing the Wheel with the Spare on the Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) This guide provides instructions for removing and replacing the wheel with the spare on the Citroen C1, as well as the Peugeot 107 and Toyota Aygo. F…

    Frequently Asked Questions

    • C1 2005-2014 - How many liters is the fuel reserve of the Citroen C1? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos