Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Mirror on Citroen C1

Model: Citroen C1 MK 2 - Years 2014-2022
Part: Side mirror

Replacing the mirror on a Citroen C1 is very simple. To remove the old and possibly broken mirror, use a plastic trim tool and lever it at the bottom. This will extract the "male" clips of the mirror from their designated spaces in the housing. Perform this operation carefully and patiently around the glass area until complete removal. Nothing could be simpler! You will find the same simplicity when refitting: here too, you just need to align the clips of the mirror with the slots in the housing. Good luck!

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the External Wing Mirror on Citroen C1
Replacing the External Wing Mirror on Citroen C1
Citroen C1 (2005-2014 / MK 1) In this video tutorial, see how to remove and replace the external wing mirror on a first-generation Citroen C1 by following these simple steps. Firs…
Removing the External Wing Mirror on a Citroen C1
Removing the External Wing Mirror on a Citroen C1
Citroen C1 (2005-2014 / MK 1) In this video tutorial, you will learn how to remove the external wing mirror on a first-generation Citroen C1 by following these simple instructions…
How to Remove the External Wing Mirror on Citroen C1
How to Remove the External Wing Mirror on Citroen C1
Citroen C1 (2005-2014 / MK 1) Learn how to remove the external wing mirror on a Citroen C1 (passenger side): use a lever to remove the internal trim piece of the mirror (next to t…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos