Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Gaiter and Gear Knob on the Citroen C1 - Toyota Aygo

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Shifter boot

See other generations:
Video tutorial

In this video tutorial, learn how to remove and replace the gear gaiter and gear knob on the Citroen C1, as well as the Toyota Aygo, by following these simple and quick steps. First, get inside the vehicle and start by removing the gaiter from the base; then, disconnect the clip found between the gaiter and knob, removing the knob as well, as shown in the video.

Now, install the new gear gaiter, securing the knob onto the lever; install a clip between the gaiter and knob and reassemble everything, applying the reverse procedure!


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Change the Gear Knob on the Citroen C1
How to Change the Gear Knob on the Citroen C1
Citroen C1 (2005-2014 / MK 1) .. the Citroen C1, as well as on the Peugeot 107 and Toyota Aygo. First, get in the vehicle and grasp the gear knob; then unscrew it counterclockwise until.. …
Replacing Gear Knob on Citroen C1
Replacing Gear Knob on Citroen C1
Citroen C1 (2005-2014 / MK 1) Replacing the gear knob usually requires simply unscrewing it, and that will be enough to remove it, as seen in the video. If this does not happen, y…
How to Remove the Gear Knob from the Citroen C1
How to Remove the Gear Knob from the Citroen C1
Citroen C1 (2005-2014 / MK 1) Removing the gear knob from your first-generation Citroen C1 is really simple. To complete this operation, simply follow this procedure. First, get i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos