Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Gear Knob on Citroen C1

Model: Citroen C1 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Shift knob

See other generations:
Video tutorial

Replacing the gear knob usually requires simply unscrewing it, and that will be enough to remove it, as seen in the video. If this does not happen, you need to lift the gaiter of the lever (if you can't do it by hand, use a plastic wedge).

Raise it as much as you can and remove the clip located under the knob (sometimes it is simply a tie wrap). In this way, in addition to the knob, you can also replace the gaiter.

If you need to replace the entire lever, follow the video for guidance, but this will be a longer and more complex operation.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Replacing the Gear Gaiter and Gear Knob on the Citroen C1 - Toyota Aygo
Replacing the Gear Gaiter and Gear Knob on the Citroen C1 - Toyota Aygo
Citroen C1 (2005-2014 / MK 1) In this video tutorial, learn how to remove and replace the gear gaiter and gear knob on the Citroen C1, as well as the Toyota Aygo, by following the…
Remove and Replace the Boot Seal on the Citroen C1
Remove and Replace the Boot Seal on the Citroen C1
Citroen C1 (2005-2014 / MK 1) In this video tutorial, follow the procedure to remove and replace the boot seal on the first series Citroen C1, as well as the Peugeot 107 and Toyot…
Replacing the External Mirror on Citroen C1
Replacing the External Mirror on Citroen C1
Citroen C1 (2014-2022 / MK 2) Replacing the mirror on a Citroen C1 is very simple. To remove the old and possibly broken mirror, use a plastic trim tool and lever it at the bottom…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos