Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Pump in the Peugeot C1?

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Pump

In this tutorial, see how to replace the windscreen washer pump in the Citroen C1, a very simple and quick operation. First, lift the front right side of the vehicle, taking all necessary safety precautions, then remove the wheel and, by undoing the five fixing bolts using a 10 mm spanner, separate the wheel arch from the bumper. Next, disconnect the power connector from the faulty pump, remove it from the housing, and disconnect the hose. To fit the replacement, simply follow the reverse procedure.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Fitting Fuel Pump and Float on Citroen C1 - Peugeot 107
Fitting Fuel Pump and Float on Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) In this video tutorial, you will see how to fit the fuel float pump on a Citroen C1 and a Peugeot 107, as they are the same models. The fuel pump is …
How to Replace the Fuel Pump/Fuel Float on the Citroen C1
How to Replace the Fuel Pump/Fuel Float on the Citroen C1
Citroen C1 (2005-2014 / MK 1) In this video tutorial, you will learn how to remove and replace the fuel pump or float pump on the Citroen C1 first series, as well as on the Peugeo…
Replacing the Windscreen of the Citroen C1
Replacing the Windscreen of the Citroen C1
Citroen C1 (2005-2014 / MK 1) In this brief guide, you will learn the main instructions to remove and replace the windscreen of the Citroen C1 by following these simple steps. To …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos