Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C1
    4. : Replacement of the clutch for Citroen C1 - Peugeot 107

Citroen C1 - Video tutorial

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Clutch
Operation: Replacement of the clutch for Citroen C1 - Peugeot 107

Today's instructions will show us the process of disassembling and replacing the clutch kit of the Citroen C1, as well as the Peugeot 107 and the Toyota Aygo. First, we lift the vehicle and begin to unscrew the oil drain bolt, letting it drain into a container. Then, we disconnect the engine support and then the front half-shafts, unscrewing the pivot bolts as shown in the video. At this point, we unscrew the clutch cover screws to access it, replacing the clutch discs. Finally, we reassemble the clutch kit, following the video tutorial until the end!


Posted on 4 January 2024 by ScegliAuto

    Frequently Asked Questions

    • C1 2005-2014 - How much does it cost to replace the clutch in a Citroen C1? Read Answer
    • C1 2005-2014 - How much does a Citroen C1 clutch kit cost? Read Answer
    • C1 2005-2014 - How much does a Citroen C1 clutch kit cost? Read Answer
    • C1 2005-2014 - What can cause problems, to the clutch of the Citroen C1? Read Answer
    • C1 2005-2014 - How much does it cost to replace the clutch of the Citroen C1? Read Answer
    • C1 2014-2022 - What to do if you have a problem with the clutch of a Citroen C1? Read Answer
    • C1 2014-2022 - How much does it cost to redo the clutch on Citroen C1? Read Answer
    • C1 2005-2014 - How much does it cost to replace the clutch on the Citroà «n C1? Read Answer
    • C1 2014-2022 - How much does it cost to replace the clutch in the Citroen C1? Read Answer
    • C1 2005-2014 - How much does the clutch kit cost for the Citroen C1 with robotic gearbox? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos