|
Do it yourself
| |||
| ||||
Citroën C1: Clutch Replacement in the Workshop
Model: Citroen C1
MK 1
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
The video documents the clutch replacement on a Citroën C1 in the workshop. With the bonnet open, the engine bay is shown as the operator clears the work area at the top. The car is raised on a ramp, and from underneath, supports and tools are visible. Two operators disconnect the gearbox and lower it by hand from the bay. Close-ups of the clutch assembly on the engine show the pressure plate; on the ground, the gearbox bell housing is visible, with details of the primary shaft and release bearing. The AISIN clutch kit box and the new clutch assembly already installed on the engine are shown. In the next phase, the gearbox is realigned and reinstalled from below; a tool/container is also seen connected under the vehicle, followed by brief shots of the reassembled engine bay. The sequence concludes with the closing of the bonnet and a frontal shot of the car after the work is completed.
Posted on 10 May 2026 by ScegliAuto
Related tutorials
Citroen C1
(2014-2022 /
MK 2)
In this guide we will see the instructions that will allow us to disassemble and replace the clutch on the Citroen C1, as well as on the Peugeot 108 …
Citroen C1
(2005-2014 /
MK 1)
Today's instructions will guide you through the process of removing and replacing the clutch kit on the Citroen C1, as well as the Peugeot 107 and To…
Citroen C1
(2005-2014 /
MK 1)
This guide provides the main instructions on how to dismantle and replace the clutch kit on the Citroen C1. First, open the engine bonnet of the vehi…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.030
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |