Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the clutch discs of the Citroen C1.

Model: Citroen C1 MK 2 - Years 2014-2022
Part: Clutch

In this guide we will see the instructions that will allow us to disassemble and replace the clutch on the Citroen C1, as well as on the Peugeot 108 and Toyota Aygo. First, we open the hood and start disconnecting and removing the battery and battery holder; then we lift the car and drain the oil, as shown in the video. At this point we disconnect the left front driveshaft of the car, disconnecting the braking system; we remove the engine support and unscrew the clutch cover screws, proceeding with the replacement of the discs!

Posted on 17 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Clutch on the Citroen C1 - Peugeot 107
Replacing the Clutch on the Citroen C1 - Peugeot 107
Citroen C1 (2005-2014 / MK 1) Today's instructions will guide you through the process of removing and replacing the clutch kit on the Citroen C1, as well as the Peugeot 107 and To…
How to Replace the Clutch on a Citroen C1 1.0
How to Replace the Clutch on a Citroen C1 1.0
Citroen C1 (2005-2014 / MK 1) Today, we will go through the procedure to remove and replace the clutch discs on a Citroen C1 1.0 petrol. First, lift the vehicle and remove the fro…
How to Replace the Clutch on a Citroën C1
How to Replace the Clutch on a Citroën C1
Citroen C1 (2014-2022 / MK 2) You can replace the clutch on a Citroën C1 by lifting the car so that the front wheels are off the ground. Once the wheels are lifted and removed, yo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos