Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the bumper of the Citroen C3

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Rear bumper

See other generations:
Video tutorial

Removing a rear bumper becomes a necessary operation not only in case of replacing it but also if you want to replace the vehicle's crossbeam. Today we will show you how to perform this operation on a Citroen C3 model mk1. We start by removing the lower clips that protect the bumper screws and then we unscrew the screws.

We open the trunk and remove the headlights, to do this we remove the side interior carpet and unscrew the screws, in order to remove the headlight. We unscrew the side screws of the bumper and the upper ones.

We remove the bumper and disconnect the connector. To remove the crossbeam you will have to unscrew the side nuts and pull forcefully outwards.

Before inserting the new crossbeam, you will have to clean the parts damaged by rust. We mount the crossbeam by tightening the nuts.

We mount the bumper and headlights to complete the operation.


Posted on 2 March 2025 by ScegliAuto


Related tutorials

How to Remove the Front Bumper from a Citroen C3
How to Remove the Front Bumper from a Citroen C3
Citroen C3 (2009-2016 / SC) Before starting, open the front bonnet of your Citroen C3. Begin by unscrewing and removing the screws located on the upper side of the bumper using …
How to disassemble and replace the front bumper of the Citroen C3
How to disassemble and replace the front bumper of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Today's video will show us how to disassemble and replace the front bumper of the Citroen C3. First, we open the hood of the car and start unscrewing…
How to remove the rear bumper from a Citroën C3?
How to remove the rear bumper from a Citroën C3?
Citroen C3 (2009-2016 / SC) To remove the rear bumper from a Citroën C3, open the bonnet and remove the side grilles inside the boot, near the lights. Inside the grilles, there …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos