|
Do it yourself
| |||
| ||||
How to remove the headlights and replace the lens on a Citroen C3
Model: Citroen C3
FC, FN
- Years 2002-2009
Start by removing the main screws on the front headlight: there are 4 screws of 10 mm (but depending on the model, they could also be Torx T20/T30): 2 are at the top (behind the grille of the bonnet) and 2 are at the bottom (behind the bumper). There are two retaining tabs on the sides of the headlight: gently pull them to release. To access the lower screws, it is necessary to partially remove the bumper by loosening the cardboard/felt panel and releasing the clips. To replace the lens, heat the sealing glue around the headlight with a heat gun (or a hairdryer); heat evenly until the glue softens, and carefully separate the lens from the body. Remove the reflective lens from the old headlight, clean and remove glue residue from the grooves of the headlight body (available on AliExpress with code 1005012130411788 for £17.29 + £31.61 shipping). Position the old lens, apply suitable sealant, reassemble carefully, and allow to dry for at least 3 hours. To reassemble, follow the reverse procedure.
Posted on 25 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Citroen C3
(2009-2016 /
SC)
To remove the rear bumper from a Citroën C3, open the bonnet and remove the side grilles inside the boot, near the lights. Inside the grilles, there …
Citroen C3
(2002-2009 /
FC, FN)
Today we will explain how to quickly and easily turn on the headlights on a 2006 Citroen C3 car. First, we get into the car and immediately turn on t…
Citroen C3
(2002-2009 /
FC, FN)
Today, you will see the instructions that will allow you to remove the front bumper and front headlights on a first-generation Citroen C3. First, ope…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.150
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |